All the qualities of PET :

The PET bottle is a great success in many countries. And no wonder, producted by the biaxially oriented blow moulding process, PET or Polyethlene Terephthalate– bottles combine outstanding performances and aesthetic qualities. They give you the super crystal clarity needed to show any product to advantage. They have excellent carbonation retention properties and a good barrier to oxygen. Extremely resistant to breakage, light to handle and transport, and safe to health and environment.

With shivsu system flexibility :

To the advantage of PET itself, the extraordinary Characteristics of the Canadian Clear Pet Bottle Blowing machines are added simplicity, compactness, reliability and flexibility.

Quickly installed, the machine is ready for producing bottles of various shapes and contents as the changing of the moulds are rapid. Renowned for these advantages, it is the small “two steps” machine which is the most sold in world and gives satisfaction to hundreds of producers for various different applications like mineral water, carbonated Softdrink project equipment, edible oil, detergents.

This is an ideal system for economical production in small series of quality bottles.

Multipurpose Infrared Rotary Heater :

Six to eight vertically horizontally and angularly adjustable double lamps can be turned to allow a more uniform heating of any type of preforms. Before blowing preheating is achieved by recirculation of hot air exhausted by lamps and the system automatically adjusts to changes in the ambient temperature.

An oven with ten lamps (optional) permits the heating of thicker preforms.
An oven with 24 lamps permits the heating of 20 litre bottle preform.
The control cabinet is equipped with a programmable microprocessor with Error Status Indicator.
Setting and adjusting of the controls can be performed manually.
For special climates the cabinet can be air conditioned.


Easy Access :

The pneumatic, hydraulic and electrical equipments, as well as the cooling system, are easily accessible.

Minimum replacement time is required when one type of bottle mould is changed for another one. No special tools are needed.

The bi-axial orientation :

PET is certainly the ideal material. But to retain that title, it also needs the full benefits of bi-axial orientation.

Bi-axial orientation requires two-stage production: the perform is first produced and then, within a precise temperature range, it is stretched both axially, (thanks to stretching rods), and radially by blowing. It is this process which gives the container its strength.

These two phases can be carried out on one double acting machine (one stage) or separately on two different machines (two stages).

The PET :

The application of this process to PET (Polyethylene terephthalate) product bottles, jars and containers which perform remarkably and uniquely: giving clarity excellent properties of carbonation retention, ingress of oxygen and virtually unbreakable, light to handle and transport and above all, kind to the environment and recyclable.

This combination of properties has opened up new and important markets, PET has become the favored material in number of applications, notably for projects and equipment for carbonated and non-carbonated soft drinks, mineral water, vegetable oils and vinegar.

But the new generation of applications is covering a still more extensive range of detergents and cleaning products, wines and other alcoholic drinks, fruits juices, certain conserves sauces, ketchup and mustard, cosmetic and pharmaceutical products, industrial paints and oils chemical products etc.,

A range of new markets with a promising potential.

Advantages of flexible system :

A system of small modular units has many advantages over one large machine.

□ You can begin small with the minimum investment.
□ As Business grows, additional units can be acquired.
□ Production volume can easily and economically be adjusted to market fluctuations.
□ Bottles of different sizes and weights can be produced simultaneously on different units.
□ Change-over from one production to another can be rapidly effected.
□ The SHIVSU-PET system is well known for its solidity and reliability according to world standards.
□ A simple system to operate means short training for operators.
□ As the machine requires very little maintenance, cost related to no operating machines are negligible.

System flexibility and productivity :

Specialized in the manufacture of bi-oriented stretch-blow-moulding machines for PET containers (starting from preforms), SHIVSU offers today a completely up–grade of small and medium capacity blow-moulding units, which combine the proven simplicity and reliability of the rotary machines concept with the most recent developments in the field of PET process technology. A state of-the-art, user-friendly operator/machine interface allows easy programming of all relevant production parameters, ensuring at the same time extremely fast product changeover. Special equipment package are available for the production of reliable hot fill PET bottles, PEN / PET bottles and bi-oriented PP-bottles.

Revolution in Pet Technology :

High production Rotary Pet Stretch Blow Moulding Machine for PET Bottles and Jars.

Canadian Clear has revolutionized the Pet Industry by producing a high production Rotary Pet Stretch Blow Moulding Machine capable of producing 1000 – 1200 Pet Bottles Per Hour as well as 2000 – 2200 Bottles per Hour. This unique Rotary design is one of its kind and involves four robo–arms which carry the preforms to the blowing station and brings out the blown bottles. Then the blown Pet bottles are ejected automatically. The machine is 80% Automatic and produces large quantities of bottles with great simplicity. The total system is controlled by a State of Art PLC with Digital Display. The PLC is user friendly and gives error status.